2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN

                                                     для заказа - info@mitsubishitools.ru

T-SLOT MILLING                                                                                                                                4°
                                                                                                                  Roughing
                                                                                                                                                                                               L4
TSMP

                                                                                                                            D1                                                                        Approx. 2mm
                                                                                                                                                                D5                                           D4

                                                                                                                                R 0.8                                              L5              L6                   ROTATING TOOLS
                                                                                                                                      4°                             L1
                                                                                                                                          ap
                                                                                                                            90°
              a	T -groove order number                                                                                                           L2

                 14, 18 and 22 are available.
              a	S houlder milling and inversed

                 spot facing are also possible.

                                                                                                                                                                     Right hand tool holder only.

                 T Slot                              Dimensions (mm)                                                                                                 *z x
                    Nomenclature
   Order Number
                         Stock
                              Number
                                 of Teeth
                                R D1 L1 D4 D5 L2 L4 L5 L6 ap                                                                              Clamp Screw                 Wrench                 Insert
                                                                                                                                                TS3                  zTKY08D           MPMW070308
TSMPR252S25 14 a 2 25 112 25 12.5 33.2 32 12 17 11                                                                                              TS4                  xTKY15R           MPMW090308
                                                                                                                                                TS5                  xTKY25R           MPMW120408
          322S32 18 a 2 32 120 32 16 41.2 36 14 19 14

          402S32 22 a 2 40 130 32 20 51.2 36 14 19 18

* Clamp Torque (N • m) : TS3=1.0, TS4=3.5, TS5=7.5

   INSERTS

   Shape         Order Number              Class     Carbide Dimensions (mm)                                                                                         Geometry
                                               UTi20T            D1 S1 Re

                 MPMW070308                Ma            7.94 3.18                                                          0.8                       Re Re
                          090308           Ma            9.525 3.18                                                         0.8
                          120408           Ma           12.7 4.76                                                           0.8

                                                                                                                                                  86° D1                                  11°
                                                                                                                                                                               S1

   RECOMMENDED CUTTING CONDITIONS y CAUTION FOR USE
                                                                              aWhen T slot machining steel, the
    Work      Hardness          Grade      Cutting Speed Feed per Revolution    workpiece must be pre-machined
   Material                                (m/min)      (mm/rev)                as shown in the drawing, so as to

P 180  280HB                   UTi20T         130           0.15               ensure smooth chip evacuation.
   Carbon Steel                 UTi20T     (100  160)   (0.1  0.2)          aSlots to be machined must be free
    Alloy Steel 280  350HB
                                                80            0.1               from chips for smooth machining.
                                           (60  100)   (0.05  0.15)

K  Cast Iron  Tensile Strength  UTi20T         100         0.15                                                                                                                        T Slot
                < 450MPa                   (80  120)   (0.1  0.2)

a Revolution (min-1)=(1000Cutting Speed)(3.14&D1)

   a : Inventory maintained.                                                                                                                                         SPARE PARTS                   M001
                                                                                                                                                                     TECHNICAL DATA
                                                                                                                                                                                                   N001 K107
                                           info@mitsubishitools.ru                                                          www.mitsubishitools.ru