2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN

                               для заказа - info@mitsubishitools.ru

RECOMMENDED CUTTING CONDITIONS

              Work Material     Hardness         Grade Cutting Speed (m/min)  Feed per Tooth (mm/tooth)  pf (mm)
P Carbon Steel                 180  280HB                                              0.2 (0.1  0.3)   < 0.5D
                               280  380HB       F7030   180 (150  200)
                  Alloy Steel                                                           0.2 (0.1  0.3)   < 0.5D

K                              Tensile Strength  VP15TF  180 (150  200)
                    Cast Iron      < 350MPa

Ductile Cast Iron              Tensile Strength  VP15TF  150 (120  170)         0.2 (0.1  0.3)         < 0.5D
                                360  500MPa     VP15TF  120 (100  150)         0.2 (0.1  0.3)         < 0.5D

                               Tensile Strength
                                500  800MPa

a Revolution (min-1)=(1000Cutting Speed)(3.14&D1)

a Table Feed (mm/min)=Feed per ToothNumber of TeethCutter Revolution
(Note 1) The above conditions are suitable for general machining purposes, it is possible to use conditions that are different from the above.
(Note 2) For horizontal feed machining, please reduce the feed rate by 20  40%.
(Note 3) If vibration occurs when machining, please reduce the depth of cut, and reduce the cutting speed by 20  50%.

                                                                                                                                                ROTATING TOOLS

                                                                                 SPARE PARTS             M001
                                                                                 TECHNICAL DATA
                                                                                                         N001 K115
                               info@mitsubishitools.ru   www.mitsubishitools.ru