2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN

CARBIDE                                                                       для заказа - info@mitsubishitools.ru

          DRILLING (SOLID CARBIDE)

          MINI-MWS

          RECOMMENDED CUTTING CONDITIONS

          y SB/LB/XB/DB Type Drill (l/d<10)

           Work     Mild Steel ( < 180HB)                               Carbon Steel, Alloy Steel (180  280HB)
          Material  Ck10                                                Ck45, 42CrMo4

          Drill Dia. Cutting Speed Revolution             Feed rate    Table Feed Cutting Speed Revolution                              Feed rate    Table Feed
                             (min-1)                    (Min.  Max.)                                               (min-1)           (Min.  Max.)   (mm/min)
          (mm)      (m/min)                                            (mm/min) (m/min)
                                                          (mm/rev)                                                                      (mm/rev)        250
          0.5 40 25400                                                  250 40 25400                                                                    555
                                               0.01 (0.005  0.015)     555 50 15900                                         0.01 (0.005  0.015)       580
          1.0 50 15900                                                  580 50 10600                                                                    550
                                               0.035 (0.020  0.050)    550 50 7900                                          0.035 (0.020  0.050)      645
          1.5 50 10600                                                  645 60 7600                                                                     840
                                               0.055 (0.035  0.080)    950 80 8400                                          0.055 (0.035  0.080)
          2.0 50 7900
                                               0.07 (0.040  0.100)                                                          0.07 (0.040  0.100)
          2.5 60 7600
                                               0.085 (0.050  0.125)                                                         0.085 (0.050  0.125)
          2.95      90       9500
                                               0.10 (0.060  0.130)                                                          0.10 (0.060  0.130)

           Work     Carbon Steel, Alloy Steel (280  350HB)             AusteniticStainless Steel ( < 200HB)
          Material  36CrNiMo4                                           X5CrNi1810, X5CrNiMo17-12-2

          Drill Dia. Cutting Speed Revolution             Feed rate    Table Feed Cutting Speed Revolution                              Feed rate    Table Feed
                             (min-1)                    (Min.  Max.)                                               (min-1)           (Min.  Max.)   (mm/min)
          (mm)      (m/min)                                            (mm/min) (m/min)
                                                          (mm/rev)                                                                      (mm/rev)        100
          0.5 30 19000                                                  190 20 12700                                                                    285
                                               0.01 (0.005  0.015)     440 30 9500                                          0.008 (0.005  0.010)      315
          1.0 40 12700                                                  460 30 6300                                                                     280
                                               0.035 (0.020  0.050)    440 30 4700                                          0.03 (0.020  0.044)       375
          1.5 40 8400                                                   535 40 5000                                                                     335
                                               0.055 (0.035  0.080)    740 40 4200                                          0.05 (0.035  0.070)
          2.0 40 6300
                                               0.07 (0.040  0.100)                                                          0.06 (0.040  0.080)
          2.5 50 6300
                                               0.085 (0.050  0.125)                                                         0.075 (0.050  0.100)
          2.95      70       7400
                                               0.10 (0.060  0.130)                                                          0.08 (0.060  0.100)

DRILLING

L016                                           info@mitsubishitools.ru  www.mitsubishitools.ru