2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN

                                           для заказа - info@mitsubishitools.ru

                                                                                                                                            CARBIDE

   RECOMMENDED CUTTING CONDITIONS

                           Drill Dia. &3.0  &6.0                   Drill Dia. &6.1  &10.0               Drill Dia. &10.1  &16.0
Type  Work Material
                                                                                                                                                                                                                   DRILLINGCutting Speed (m/min) Feed (mm/rev) Cutting Speed (m/min) Feed (mm/rev) Cutting Speed (m/min) Feed (mm/rev)

   N Aluminium Alloy       90 (40  140) 0.15 (0.05  0.3)          100 (50  150)    0.2 (0.1  0.3)     120 (60  170) 0.25 (0.1  0.4)

M Aluminium Alloy Casting  100 (60  150)  0.12 (0.05  0.25)       110 (70  160)    0.15 (0.05  0.25)  130 (80  180)   0.2 (0.1  0.3)
A                           40 (20  60)    0.15 (0.1  0.2)         60 (40  80)        0.2 (0.1  0.3)   80 (60  100)   0.3 (0.2  0.4)
E  K  Gray Cast Iron

      Ductile Cast Iron    30 (20  40)    0.1 (0.05  0.15)        40 (20  60) 0.12 (0.05  0.2)        60 (40  80)     0.2 (0.1  0.3)

   N Aluminium Alloy       100 (60  150) 0.15 (0.05  0.3)         120 (80  170)    0.2 (0.1  0.3) 150 (100  200) 0.25 (0.1  0.4)

M Aluminium Alloy Casting  120 (80  170)  0.12 (0.05  0.25)       150 (100  180)   0.15 (0.05  0.25)  160 (120  200)  0.2 (0.1  0.3)
A                           60 (40  80)    0.15 (0.1  0.2)           80 (60  110)     0.2 (0.1  0.3)   100 (70  130)  0.3 (0.2  0.4)
S  K  Gray Cast Iron

      Ductile Cast Iron    45 (30  60)    0.1 (0.05  0.15)        60 (40  80) 0.12 (0.05  0.2)        80 (60  100)    0.2 (0.1  0.3)

y HOLE AND DRILL DIAMETERS FOR THREAD TAPPING

                                           Thread Tapping                                    Rolled Thread Tapping

      Thread Size          Drill Diameter  Hole Diameter Tolerance                    Drill Diameter      Hole Diameter Tolerance
                                ( & D1)     max min                                        ( & D1)         max min

       M4x0.7               3.3             3.242                    3.422            3.65                3.65             3.70
       M5x0.8               4.2             4.134                    4.334
       M6x1.0               5.0             4.917                    5.153            4.60                4.59             4.66
       M8x1.25              6.8             6.647                    6.912
      M10x1.5               8.5             8.376                    8.676            5.50                5.48             5.57
      M12x1.75             10.3            10.106                   10.441
      M14x2                12.0            11.835                   12.210            7.35                7.34             7.41
      M16x2                14.0            13.835                   14.210
                                                                                      9.21                9.18             9.28

                                                                                      11.08               11.05            11.15

                                                                                      12.96               12.92            13.04

                                                                                      14.96               14.92            15.04

                                           info@mitsubishitools.ru  www.mitsubishitools.ru                L101TECHNICAL DATA N001