2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN

                                                                            для заказа - info@mitsubishitools.ru

       CBN & PCD TURNING INSERTS

      MBC010

CBN & PCD TURNING INSERTSWEAR RESISTANCE                                                                                                                                    FINISHED SURFACE
                                                             Flank Wear (mm)
                                                                                                                                                     Finished Surface (!m)FractureFracture                             Competitor's B
                                                                                                                                                                            6
      0.15 Competitor's A

                  Competitor's B                                                                                                                                            Competitor's A          Large wear
      0.1                                                                                                                                                                                           (Tool life)

                                                                    MBC010

                                                                                                                                                                            4

                                                                                                                                                                                            MBC010

      0.05             10 20 30                                     40                                                                                                      2                                                          30
            0                Cutting Time (min)                                                                                                                               0 10 20
                                                                                                                                                                                                     Cutting Time (min)
                       
                                                                                                                                                                             
                       Workpiece : Alloy steel (60HRC)                                                                                                                       Workpiece : Alloy steel (60HRC)
                       Insert : NP-CNGA120408GS2                                                                                                                             Insert : NP-CNGA120408GS2
                       Cutting Speed : 300m/min                                                                                                                              Cutting Speed : 150m/min
                       Feed : 0.05mm/rev                                                                                                                                     Feed : 0.15mm/rev
                       Depth of Cut : 0.1mm                                                                                                                                  Depth of Cut : 0.2mm
                       Dry Continuous Cutting                                                                                                                                Dry Continuous Cutting

      MBC010 employs TiN based coating for superior, consistent surface finishes.

      MBC020

                        TOUGHNESS                                                   MBC020

                       0.10                                         Competitor's A
                                                    Competitor's B
      Flank Wear (mm)                                                                                             Previous coated grade
                                                Conventional
                       0.08                                         MBC020                                        Competitor's A

                       0.06                                                                                       Competitor's B                                                                     5                                 10
                                                                                                                                     0                                                      Cutting Time (min)
                       0.04

                       0.02

                       0.00
                             0 2 4 6 8 10 12 14 16
                                                 Cutting Time (min)

                                                                                                                                                        

                       Workpiece : Alloy steel (60HRC)                                                                                                                      Workpiece : Alloy steel (60HRC)
                                       Round bar                                                                                                                            	 8 Grooves
                                                                                                                                                                            Insert : NP-CNGA120408GA4
                       Insert : NP-CNGA120408GA4                                                                                                                            Cutting Speed : 200m/min
                       Cutting Speed : 220m/min                                                                                                                             Feed : 0.1mm/rev
                       Feed : 0.1mm/rev                                                                                                                                     Depth of Cut : 0.1mm
                       Depth of Cut : 0.1mm                                                                                                                                 Dry Interrupted Cutting
                       Dry Continuous Cutting

      MBC020 exhibits excellent cutting performance for a wide range of applications

                        from continuous through to interrupted machining.

B006                   info@mitsubishitools.ru                      www.mitsubishitools.ru