2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
CBN BREAKER INSERT
Depth of Cut (mm)
CBN & PCD TURNING INSERTS
FEATURES
aChip Breaker Geometry Designed for Excellent Chip Control
R-shaped chip breaker ensures optimization of the cutting point and the chip breaker
position. Enables effective chip discharge even when copying and also prevents the fine
chips generated during finishing operations from wrapping round the tool holder.
Additionally, positive inserts are available that offer improved chip disposal when boring.
aLong Life Coated CBN Grade
The coated grade MBC020 made with MIRACLE coating technology exhibits high cutting
performance over a wide range of machining applications from continuous through to medium
interrupted cutting.
a Application Area a External Turning MITSUBISHI’s Breaker
Competitor’s
Area
0.3
0.2
MITSUBISHI’s Workpiece : Alloy Steel (55HRC) Competitor’s Breaker
Breaker Area
Insert : BF-CNGG120408TA4
0.1
Cutting Speed : 100m/min
Feed : 0.2mm/rev
Depth of Cut : 0.1mm
0 0.1 0.2 0.3 Dry Cutting
Feed (mm/rev)
MULTI-CORNER TYPE INSERTS
aA single sided, multi-corner type insert has no
cutting edges on the underside.
The type of grade is stamped on the upper side.
Double Sided, multi-corner type insert y Double sided, multi-corner type insert
Available in MBC020 grade. Upper side Underside
NP-CNGA120408GA4
No. of Cutting Edge Corners
Single Sided, multi-corner type insert
Available in CBN grades except MB810.
NP-CNGA120408GA2
No. of Cutting Edge Corners
Corner R0.2 insert
Corner R0.2 inserts are available in MBC020, making it suitable for copying
and corner radius machining.
info@mitsubishitools.ru www.mitsubishitools.ru B013
