2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN

                                             для заказа - info@mitsubishitools.ru

CTBH

                                                                                                  L1
                                                       7.5

                                                                                 3°

                                                          60° L4 (Effective Cutting Edge Length)
                                       H3
                                                  H2 S1
                                                                                                                    H1

                                                                                                                                                            B
                                                                                                                                                                                          SMALL TOOLS
   Order Number               Stock                            19.5           Dimensions (mm)               Right hand tool holder shown.
                              RL
                                       Insert Number                                                                     *

                                                                         H1 B L1 H2 H3 S1 Clamp Screw Wrench

   CTBHR/L1010-160            ss       BTBT                                   10 10 120 10 12 3.4 NS402W NKY15R
                1212-160      ss                       60450oR/L-B
                1616-160      ss
                                                                              12 12 120 12  3.4 NS403W NKY15R
                                                       606000R/L

                                                                              16 16 120 16  3.4 NS403W NKY15R

(Note 1) Please use right hand inserts for right hand holders and left hand inserts for left hand holders.

(Note 2) Set the maximum depth of cut at under 60% of the effective cutting edge length.

* Clamp Torque (N • m) : NS402W=1.0, NS403W=1.0

   INSERTS                                     Coated  Dimensions (mm)       Effective Cutting              Geometry
                                       Hand                                   Edge Length
               Order Number                            Re *          S2                                                    Re 5.5
                                              VP15TF                          *L4 (mm)
           BTBT604500R-B                Rs             0 0.2                     4.5 With Breaker                             15°9.4 3.5
                   604500L-B             Ls                                      4.5                                     0.7
                   604501R-B            Rs             0 0.2                     4.5 25                                              Right handS2
                   604501L-B             Ls                                                                    45° insert shown.
                                                       0.1 0.3                   4.5
           BTBT606000R                                                                                                     Re 7
                   606000L                             0.1 0.3
                                                                                                                               15°
                                       Rs              0             0.2 6.0 Without Breaker                9.4 3.5
                                       Ls              0                                                                             Right hand0.7
                                                                     0.2 6.0                                   45° insert shown.S2

                                                                                                      25

* Numeric value set insert on holder.

   RECOMMENDED CUTTING CONDITIONS

   Work Material                Hardness                              Grade   Cutting Speed (m/min)          Feed (mm/rev)
                              180HB  280HB                          VP15TF       100 (50  150)            0.08 (0.01  0.15)
P  Carbon Steel                                                      VP15TF       110 (30  180)            0.08 (0.01  0.15)
    Alloy Steel                                                     VP15TF         80 (50  120)           0.06 (0.02  0.1)
                                   < 200HB                           VP15TF       150 (70  230)            0.09 (0.03  0.15)
   Free Cutting Steel
                                       
M Stainless Steel

N Non-Ferrous Metal

                                                                                                            SPARE PARTS            M001
                                                                                                            TECHNICAL DATA
                                                                                                                                   N001 D013
                                       info@mitsubishitools.ru               www.mitsubishitools.ru