2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
BORING BARS
CLASSIFICATION
Name of Tool Holder Features '=75° '=91° '=93°
' ' '
DIMPLE BAR a Tfrhoemm&i1n0im. um cutting diameter is FSTUP FSDUC FSVUB/C
DOUBLE CLAMP a 5°, 7°, 11° positive inserts.
DIMPLE BAR a Excellent vibration resistance due ^ E008 ^ E009 ^ E012
F Type Boring Bars
BORING S Type Boring Bars to a light dimple head.
P Type Boring Bars a l/d is 3 to 5 times the diameter
M Type Boring Bars DSKN DTFN DDUN DVUN
(Carbide shank is 7 to 8 times the
diameter). ^ E015 ^ E015 ^ E014 ^ E016
a Tfrhoemm&i3n2im. um cutting diameter is SSKC STFC FSTU FCTU
a Economical negative insert.
a Single action type. ^ E034 ^ E029 ^ E026 ^ E027
a Excellent vibration resistance due
PSKN PTFN SDUC SVUC
to a light dimple head.
(With coolant hole.) ^ E036 ^ E036 ^ E030 ^ E034
a l/d is 3 to 4 times the diameter.
PDUN
a The minimum cutting diameter is
from &5.8. ^ E037
a 11°positive insert.
a Screw-on type and Clamp-on type.
a l/d is 3 to 5 times the diameter.
a FSWL type is 7°positive insert.
a The minimum cutting diameter is
from &11.
a ISO standard.
a 7°positive insert.
a Screw-on type.
a l/d is 3 to 5 times the diameter
(Carbide shank is 7 times the diameter).
a The minimum cutting diameter is
from &20.
a ISO standard.
a Economical negative insert.
a Lever lock type, and pin lock type.
a l/d is 3 times the diameter.
a The minimum cutting diameter is
&63.
a Negative trigon shape insert.
a Double clamp type.
a l/d is 3 times the diameter.
AL Type Boring Bars a The minimum cutting diameter is
from &20.
STFE
a Suitable for non-ferrous metal.
a 20°positive insert. ^ E041
a Screw-on type.
a l/d is 6 times the diameter.
a Excellent vibration resistance.
MICRO-DEX a The minimum cutting diameter is
Boring Bars from &5.
(Carbide Shank) a 5°, 7°positive insert.
a Carbide shank type.
a Easy-to-use tool geometries. SWUB STUC
a Suitable for small workpieces.
a l/d is 5 times the diameter. ^ E017 ^ E018
MICRO-MINI TWIN a The minimum cutting diameter is
Boring Bars from &2.2.
a Solid carbide type with two cutting
edges.
a Continuous cutting from boring to
facing.
a With or without a chip breaker.
MICRO-MINI a &T3h.e2.minimum cutting diameter is from
Boring Bars a Solid carbide type (Single cutting edges).
a l/d is 5 times the diameter.
a Cutting edge can be shaped according CooFR-BLS
to the application.Thus, it covers a wide ^ E023
cutting range
(threading,grooving,copying, etc.).
(Note 1) Holders with blue colour symbol have an anti-vibration carbide shank. (For Micro-dex boring bars, carbide shank only.)
E002 info@mitsubishitools.ru www.mitsubishitools.ru