2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
GROOVING SYSTEM
GYSERIES (EXTERNAL GROOVING)
1 00° type holder
(Note 1) For modular blades and modular holders, please order separately.
(Note 2) Please use right hand modular blade for right hand modular holder and
Insert GY2Mooooooooo--GGSM Insert GY2Gooooooooo-MF left hand modular blade for left hand modular holder.
Insert GY2Mooooooooo-GU Insert GY2Mooooooooo-MS ar
Insert GY1Gooooooooo- GF Insert GY2Mooooooooo-MM
GS
GROOVING L1
H2 H2 F1
W3L2L2
D1 D1
H1 H1Fig. 1Fig. 2
H2 H2 B
D1 D1
H1 H1
Insert GY2Mooooooooo-BM Insert GY2Mooooooooo--GGSM L2 L2
Insert GY2Mooooooooo-GU
Insert GY2MoooooR/Loo-GM
Fig. 5 Fig. 6
Insert Max. Max. Right hand tool holder shown.
Width Hand Groove Depth Cut Off Diameter Order Number
Seat
Size W3 (R/L) ar D1 ID
(mm) (mm) (mm)
Modular Blade Stock Modular Holder Stock
8 16 (1E1R4J1) GYM25RA-J08 a
14 28 (1E1R4J2) GYM25RA-J14 a GYHR2020K00-M25R
a
*25 1 *50 2 (1E1R4J3) GYM25RA-J25 a
8 GYM25RA-J08 a
16 (1G1R4J1)
14 28 (1G1R4J2) GYM25RA-J14 a GYHR2525M00-M25R a
*25 1 *50 2 (1G1R4J3) GYM25RA-J25 a
8 GYM25RA-J08 a
16 (1Q1R4J1)
14 28 (1Q1R4J2) GYM25RA-J14 a GYHR3225P00-M25R a
25 1 50 2 (1Q1R4J3) GYM25RA-J25 a
* *R
8 16 (1J1R4J1) GYM25RA-J08 a
14 28 (1J1R4J2) GYM25RA-J14 a GYHR3232P00-M25R
a
25 *1 *50 2 (1J1R4J3) GYM25RA-J25 a
6.00 8 16 (1E1L4J1) GYM25LA-J08 a GYHL2020K00-M25L a
J 6.31 14 28 (1E1L4J2) GYM25LA-J14 a GYHL2525M00-M25L a
(1E1L4J3) GYM25LA-J25 a GYHL3225P00-M25L a
6.35 *25 1 *50 2 GYM25LA-J08 a GYHL3232P00-M25L a
8 (1G1L4J1) GYM25LA-J14 a
L 14 16 (1G1L4J2) GYM25LA-J25 a
28 (1G1L4J3) GYM25LA-J08 a
*25 1 GYM25LA-J14 a
8 *50 2 (1Q1L4J1) GYM25LA-J25 a
14 (1Q1L4J2) GYM25LA-J08 a
16 (1Q1L4J3) GYM25LA-J14 a
*25 1 28 GYM25LA-J25 a
8 (1J1L4J1)
14 *50 2 (1J1L4J2)
(1J1L4J3)
25 *1 16
28
50 *2
1 The maximum groove depth varies according to the insert used. Please refer to the maximum groove depth of inserts on pages F014 F016.
*2 The maximum cut off diameter D1 varies according to the insert used. The cut off diameter is double the maximum groove depth (ar) of inserts on pages F014F016.
**3 Dimensions shown are when the gauge insert is used. If other insert geometries are used then L1, L2 and F1 values may vary.
a : Inventory maintained.
F028 info@mitsubishitools.ru www.mitsubishitools.ru