2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
GROOVING SYSTEM
GYSERIES (EXTERNAL GROOVING)
2 90° type holder
(Note 1) For modular blades and modular holders, please order separately.
(Note 2) Please use left hand modular blade for right hand modular holder and
Insert GY2Mooooooooo--GGSM Insert GY2Gooooooooo-MF right hand modular blade for left hand modular.
Insert GY2Mooooooooo-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF Insert GY2Mooooooooo-MM
GS
B
F1
ar
Insert GY2Mooooooooo-BM Insert GY2Mooooooooo--GGSM Fig. 2 Fig. 1 W3 L2 L1
Insert GY2Mooooooooo-GU
Insert GY2MoooooR/Loo-GM D1
D1
H2 H2
H1
Right hand tool holder shown.
GROOVING Insert Max. Max. Order Number
Width Hand Groove Depth Cut Off Diameter
Seat ID
Size W3 (R/L) ar D1 Modular Blade Stock Modular Holder Stock
(mm) (mm) (mm) (2E1R3D1) GYM20LA-D06 GYHR2020K90-M20L
(2E1R3D2) GYM20LA-D10 a GYHR2525M90-M25L a
6 12 (2E1R3D3) GYM20LB-D18 a a
(2G1R4D1) GYM25LA-D06 a
10 20 (2G1R4D2) GYM25LA-D12 a
(2G1R4D3) GYM25LA-D20 a
*18 4 36 a
6 12
12 24
20 1 40 2
* *R
D 2.00 6 12 (2E1L3D1) GYM20RA-D06 a
2.24 10 20 (2E1L3D2) GYM20RA-D10 a
36 (2E1L3D3) GYM20RB-D18 a GYHL2020K90-M20R a
L *18 4 GYM25RA-D06 a GYHL2525M90-M25R a
6 12 (2G1L4D1) GYM25RA-D12 a
12 24 (2G1L4D2) GYM25RA-D20 a
(2G1L4D3)
20 *1 40 *2
6 12 (2E1R3E1) GYM20LA-E06 a
10 20 (2E1R3E2) GYM20LA-E10 a GYHR2020K90-M20L
a
*18 4 36 (2E1R3E3) GYM20LB-E18 a
6 12 (2G1R4E1) GYM25LA-E06 a
12 24 (2G1R4E2) GYM25LA-E12 a GYHR2525M90-M25L a
20 1 40 2 (2G1R4E3) GYM25LA-E20 a
* *R
2.39 6 12 (2E1L3E1) GYM20RA-E06 a GYHL2020K90-M20R a
E 2.50 10 20 (2E1L3E2) GYM20RA-E10 a GYHL2525M90-M25R a
36 (2E1L3E3) GYM20RB-E18 a
2.74 *18 4 GYM25RA-E06 a
6 12 (2G1L4E1) GYM25RA-E12 a
L 12 24 (2G1L4E2) GYM25RA-E20 a
(2G1L4E3)
20 *1 40 *2
1 The maximum groove depth varies according to the insert used. Please refer to the maximum groove depth of inserts on pages F014 F016.
*2 The maximum cut off diameter D1 varies according to the insert used. The cut off diameter is double the maximum groove depth (ar) of inserts on pages F014F016.
*3 Dimensions shown are when the gauge insert is used. If other insert geometries are used then L1, L2 and F1 values may vary.
**4 The maximum groove depth is limited by the workpiece diameter. For details, please refer to Page F041.
F032 a : Inventory maintained. info@mitsubishitools.ru www.mitsubishitools.ru