2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
GROOVING SYSTEM
GYSERIES (FACE GROOVING)
5 90° type holder
(Note 1) For modular blades and modular holders, please order separately.
(Note 2) P lease use left hand modular blade for right hand modular holder and right
Insert GY2Mooooooooo--GGSM Insert GY2Gooooooooo-MF hand modular blade for left hand modular.
Insert GY2Mooooooooo-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF Insert GY2Mooooooooo-MM
GS
B
F1
ar
W3 L2 L1
Insert GY2Mooooooooo-BM Fig. 2 Fig. 1
H2 H2 H1
&D1
Right hand tool holder shown.
GROOVING Seat Insert Hand First Cut Diameter Max. Order Number
Size Width (R/L) D1 (mm) Groove Depth
ID
W3 Min. Max. ar
(mm) (mm) Modular Blade Stock Modular Holder Stock
40 50 14 (5G1R4G11) GYM25LD-G14-040 a
50 60 14 (5G1R4G12) GYM25LD-G14-050 a
14 (5G1R4G13) GYM25LD-G14-060
60 85 a
*25 1 (5G1R4G23) GYM25LD-G25-060 a
R 85 125 a GYHR2525M90-M25L a
14 (5G1R4G14) GYM25LD-G14-085 a
125 200 a
*25 1 (5G1R4G24) GYM25LD-G25-085 a
180 280 a
14 (5G1R4G15) GYM25LD-G14-125 a
G 4.00 250 999 a
4.24 40 50 *25 1 (5G1R4G25) GYM25LD-G25-125 a
14 (5G1R4G16) GYM25LD-G14-180 a
*25 1 (5G1R4G26) GYM25LD-G25-180
14 (5G1R4G17) GYM25LD-G14-250
*25 1 (5G1R4G27) GYM25LD-G25-250
14 (5G1L4G11) GYM25RD-G14-040
50 60 14 (5G1L4G12) GYM25RD-G14-050 a
60 85 14 (5G1L4G13) GYM25RD-G14-060 a GYHL2525M90-M25R a
L 85 125 a
*25 1 (5G1L4G23) GYM25RD-G25-060 a
125 200 a
180 280 14 (5G1L4G14) GYM25RD-G14-085 a
250 999 a
*25 1 (5G1L4G24) GYM25RD-G25-085 a
a
14 (5G1L4G15) GYM25RD-G14-125 a
a
*25 1 (5G1L4G25) GYM25RD-G25-125
14 (5G1L4G16) GYM25RD-G14-180
*25 1 (5G1L4G26) GYM25RD-G25-180
14 (5G1L4G17) GYM25RD-G14-250
*25 1 (5G1L4G27) GYM25RD-G25-250
1 The maximum groove depth varies according to the insert used. Please refer to the maximum groove depth of inserts on pages F014 F016.
**2 Dimensions shown are when the gauge insert is used. If other insert geometries are used then L1, L2, F1 and D1 values may vary.
Notes when selecting a modular blade (1) &D1 (Min.)
&D1 (Max.)
a Select a modular blade for face grooving, so that the cutting diameter at
the first pass is within the range of D1 minimum and D1 maximum that
are described in the table of dimensions.
a : Inventory maintained.
F098 info@mitsubishitools.ru www.mitsubishitools.ru