2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
SYMBOL DESCRIPTIONS
Tool material Coating
UWC Ultra micro grain carbide MS (Al, Ti)N coating
(Al,Ti)N offers higher versatility.
Ultra micro grain carbide is used as the substrate
material.
CBN Cubic boron nitride (Al,Ti,Cr)N multilayer coating
Mitsubishi’s original CBN is used. Offers higher versatility for carbon steel, alloy steel
and hardened steel.
KHA S High hardness powder metallurgy HSS VF IMPACT MIRACLE Coating
Single phase nano crystal coating technology
High hardness powder metallurgy HSS is used as the for higher film hardness and heat resistance.
substrate material.
Tolerances VQ VQ Coating
New smooth and dense coating technology for high
Outside diameter tolerance efficiency milling of difficult to cut materials.
Indicates the diameter tolerance of the end mill. CRN CRN Coating
Newly developed CrN coating for Copper
R tolerance Electrodes machining.
Indicates the radial tolerance of a ball nose end mill. DLC DLC Coating
R tolerance Hardness similar to that of CVD diamond coating
achieved with high adhesion strength.
Indicates the radial tolerance of an end mill with a (Jointly developed with NAGATA SEIKI CO.,LTD.)
corner radius.
DFC Diamond Coating SOLID END MILLS
Tolerance of Taper angle Suitable for CFRP and CFRP-Aluminium materials.
Indicates the tolerance of the taper angle.
Tolerance of Point diameter DF Diamond Coating
Suitable for graphite machining.
Indicates the tolerance of the point diameter.
V Violet Coating
R tolerance Increased tool life of 2 3 times that of TiN coated
products.
Indicates the radial tolerance of a cutter with a
corner radius. Angle and sharp corner edge
Shank diameter tolerance 10° Helix angle
Indicates the shank diameter tolerance. Indicates the helix angle of the end mill.
Sharp corner edge
Indicates the end mill has a sharp corner edge.
Gash land
Indicates the end mill cutting edge has a gash land.
info@mitsubishitools.ru www.mitsubishitools.ru I003
