2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
MICRO-GRAIN CEMENTED CARBIDE TURNING INSERTS
(SOLID TOOLS)
aCompared to general cemented carbide, micro-grain alloy has higher wear resistance and higher
toughness.
SELECTION STANDARD CUTTING PERFORMANCE
Cutting Tool Recommended Grade Work Material Peripheral Edge Flank Wear (mm)0.4
PCB Drill SF10 Non-Metal 9.0Co HSS
MF07
MF10 Steel • Cast Iron 0.3 0.6
MF20 Steel • Cast Iron Powder HSS TF15
Steel • Cast Iron, etc.
Solid Carbide Drill TF15 0.2
0.1
Solid End Mill HTi10 10 20 30 40 50
TF15 Cutting Length (m)
Gear Hob MF10
Reamer TF15
Tap etc. MF20 Workpiece : Die steel (40HRC)
MF30 Tool :& 6mm,4 flutes
Helical Angle : 30°
vc=30m/min
n=1,600m/min-1
fz=0.02mm/tooth
vf=128mm/min
Depth of Cut in the Axial Direction=9.0mm
Depth of Cut in the Radial Direction=0.6mm
Down Cut, Dry
GRADE CHARACTERISTICS
Grade **Grade Characteristics ISO Wear Fracture Corrosion
HTi10 *Specific Gravity Hardness(HRA) T.R.S (Gpa) Resistance Resistance Resistance
14.9 92.0 3.2 K10
K20 e u u
K01
TF15 14.5 91.0 4.0 K01 eue
K01
SF10 14.9 92.7 3.8 K10 eue
K20
MF07 14.7 93.2 3.9 eue
MF10 14.6 93.0 4.0 eue
MF20 14.2 92.0 4.4 uee
MF30 13.7 90.7 4.3 uee
1GPa=102kg/mm2
*** After HIP
info@mitsubishitools.ru www.mitsubishitools.ru A041