2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
CARBIDE
RECOMMENDED CUTTING CONDITIONS
Work material Carbon steel, Cast iron, Alloy steel, Work material Carbon steel, Cast iron, Alloy steel,
Pre-hardened steel Pre-hardened steel
Cf53, GG25 Cf53, GG25
Dia. Neck length Revolution Feed rate Depth of cut Dia. Neck length Revolution Feed rate Depth of cut
(mm) (mm) (min-1) (mm/min) ap (mm) (mm) (mm) (min-1) (mm/min) ap (mm)
0.2 0.5 40000 600 0.004 1.5 6 40000 2400 0.10
0.3 1 40000 400 0.001 1.6 10 30000 1800 0.05
0.4 1 40000 650 0.007 2 20 15000 0.02
0.5 3 40000 500 0.002 30 600 0.005
9 22000 150 0.001 2.5 45 7500 300 0.001
0.6 2 40000 800 0.007 5000 150
4 40000 800 0.003 3 6 40000
0.7 12 17000 150 0.001 10 30000 2400 0.12
2 40000 950 0.01 4 16 20000 1800 0.07
0.8 6 40000 700 0.003 5 40000 1000 0.04
0.9 10 25000 400 0.002 6 6 30000
15 14000 150 0.001 10 20000 2400 0.18
1 2 40000 950 0.01 16 8000 1800 0.10
6 40000 800 0.005 30 6000 1000 0.06
1.2 10 25000 450 0.003 40 4200 0.04
18 12000 150 0.001 60 25000 500 0.01
2 40000 1000 0.02 18000 250 0.003
6 40000 900 0.01 8 12000 150
8 30000 700 0.005 16 8000
10 11000 300 0.005 20 4000 2500 0.20 SOLID END MILLS
4 40000 1200 0.02 40 20000 1700 0.10
8 40000 1000 0.01 50 15000 1000 0.08
12 25000 400 0.003 10000 0.03
24 10000 150 0.001 8 5000 400 0.015
6 40000 1300 0.02 16 3700 150
10 35000 1000 0.01 20 15000
15 400 0.003 40 11000 2000 0.30
6 9000 1600 0.04 50 6400 1400 0.15
8 40000 1600 0.03 12 4500 0.10
12 40000 1000 0.02 20 2800 800 0.02
20 30000 400 0.005 30 12000 250 0.010
30 15000 150 0.001 40 5100 150
6 1900 0.06 50 2200
8 8000 1900 0.04 16 10000 3000 0.30
12 40000 1000 0.03 35 4200 2200 0.22
20 40000 150 0.01 60 1900 1200 0.12
25000 20 0.05
40 400 0.018
6500 60 150
2500 0.35
750 0.15
150 0.02
2000 0.40
800 0.20
150 0.10
ap:Depth of Cut in the Axial Direction
1) If the depth of cut is shallow, the revolution and feed rate can be increased.
2) Cutting conditions may be considerably different due to the overhang (milling depth), depth of cut, and machine tool. Please see the above
table as a standard.
info@mitsubishitools.ru www.mitsubishitools.ru I047