2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN

                                                                  для заказа - info@mitsubishitools.ru

                 MSTAR END MILLS

CARBIDE          MSJHD
                 High power, Semi long cut length, 4 flute

                   RECOMMENDED CUTTING CONDITIONS

                 y Shoulder milling

                            Carbon steel, Cast iron,  Alloy steel, Tool steel,  Austenitic stainless steel,  Hardened steel (45  55HRC) Heat resistant alloys
                  Work Alloy steel (  30HRC)         Pre-hardened steel        Titanium alloy

                 material Cf53, GG25                  X40CrMoV51                X5CrNi1810, X5CrNiMo17122, X40CrMoV51               Inconel718
                                                                                Ti6Al4V
                                                                                                                                     Revolution
                 Dia.      Revolution  Feed rate      Revolution  Feed rate     Revolution  Feed rate        Revolution  Feed rate      (min-1)  Feed rate
                 (mm)        (min-1)   (mm/min)          (min-1)  (mm/min)        (min-1)   (mm/min)           (min-1)   (mm/min)                (mm/min)
                                                                                                                                        3800
                   2        11000        370             7000       230           7000        210            5000              100      2500         55
                   3          8000       550             5100       320           5100        300            3800              190      1900         80
                   4          6200       620             4000       350           4000        340            3000              210      1500       110
                   5          5000       670             3200       370           3200        360            2400              220      1300       110
                   6          4200       750             2600       400           2600        390            2000              220                 110
                   8          3200       780             2000       420           2000        400            1500              230       960       100
                 10           2500       690             1600       410           1600        380            1200              210       760       100
                 12           2100       670             1300       380           1300        340            1000              190       640         80
                 16           1600       570             1000       320           1000        280                              170       480         65
                 20           1200       470                        290                       260             750              150       380         50
                                                           800                      800                       600

                                                      < 0.05D                                                            < 0.02D

                 Depth of                             2.5D                                                               2.5D
                   cut

SOLID END MILLS                                                                                                                                                                                                                    D:Dia.

                 1)	When cutting austenitic stainless steels, the use of water-soluble cutting fluid is effective.
                 2)	If the depth of cut is shallow, the revolution and feed rate can be increased.
                 3)	If the rigidity of the machine or the work materials installation is very low, or chattering and noise are generated, reduce the revolution and

                    feed rate proportionately.

I056                                                  info@mitsubishitools.ru               www.mitsubishitools.ru