2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN

                                                             для заказа - info@mitsubishitools.ru

                 MSTAR END MILLS

CARBIDE          MS2ES                                                                 MS3ES
                 End mill, 2 flute, For small automatic lathe                          End mill, 3 flute, For small automatic lathe

                 RECOMMENDED CUTTING CONDITIONS

                           Carbon steel, Cast iron,          Alloy steel, Tool steel,             Austenitic stainless steel,  Hardened steel (45  55HRC)
                           Alloy steel (  30HRC)            Pre-hardened steel                   Titanium alloy
                  Work
                 material  Cf53, GG25                        X40CrMoV51                           X5CrNi1810, X5CrNiMo17122,   X40CrMoV51
                                                                                                  Ti6Al4V
                                                                                                                                   Revolution
                 Dia.      Revolution  Feed rate             Revolution                Feed rate  Revolution  Feed rate               (min-1)  Feed rate
                 (mm)        (min-1)   (mm/min)                (min-1)                 (mm/min)     (min-1)   (mm/min)                         (mm/min)
                                                                                                                                     5000
                   3        10000        600                   7000                      400        6000        300                  4000        120
                   4          7500       600                   5200                      400        4500        300                  3200        120
                   5          6000       600                   4200                      400        3600        300                  2700        120
                   6          5000       600                   3500                      400        3000        300                  2300        120
                   7          4500       560                   3000                      360        2700        280                  2000        110
                   8          4000       520                   2800                      350        2400        260                  1600        110
                 10           3200       450                   2200                      300        1900        230                  1300        100
                 12           2700       410                   1900                      270        1600        210                              100

                                                     < 0.2D  D                           < 0.2D                                < 0.05D         D
                                                     < 1D                                                                      < 1D                            < 0.1D
                 Depth of
                    cut

SOLID END MILLS                                                                                                                                                                                                                    D:Dia.

                 1)	When cutting austenitic stainless steels, the use of water-soluble cutting fluid is effective.
                 2)	If the depth of cut is shallow, the revolution and feed rate can be increased.
                 3)	When drilling, please set the feed rate at 1/3 or below the values above.
                 4)	If the rigidity of the machine or the work materials installation is very low, or chattering and noise are generated, reduce the revolution and

                    feed rate proportionately.

I070                                                         info@mitsubishitools.ru              www.mitsubishitools.ru