2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN

                                                          для заказа - info@mitsubishitools.ru

                                                                                                                                                     CARBIDE

RECOMMENDED CUTTING CONDITIONS

             Carbon steel, Cast iron, Alloy steel,                Hardened steel (45  55HRC)
 Work Pre-hardened steel                                          X40CrMoV51
material Cf53, GG25

   Dia.   Revolution  Feed rate                     Depth of cut  Revolution  Feed rate         Depth of cut
  (mm)      (min-1)   (mm/min)                          (mm)        (min-1)   (mm/min)              (mm)

 	2       30000       4500                          0.18           24000        3600               0.10
 	2.5                                               0.25           19000        3000               0.13
 	3       24000       3900                          0.30           16000        2700               0.15
 	4                                                 0.40           12000        2400               0.20
 	5       20000       3500                          0.50                        1800               0.25
 	6                                                 0.60             9000       1470               0.30
 	8       15000       3000                          0.80             7000       1050               0.40
 10                                                 1.00             5600                          0.50
 12       12000       2400                          1.00             4500        950               0.50
 16                                                 2.00             3800        860               0.80
 20       10000       2100                          3.00             1200        120               1.00
                                                                     1000        100
Depth of  8000        1500                          D
   cut
          6400        1400

          5400        1200

          2400        550

          1900        480

          < Please refer to the list above
                   for depth of cut.