2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
CARBIDE
RECOMMENDED CUTTING CONDITIONS
Aluminium alloy Aluminium cast,
Copper, Copper alloys
Work
material
R % < 15° %>15° % < 15° %>15°
(mm)
Revolution Feed rate Revolution Feed rate Revolution Feed rate Revolution Feed rate
R 0.1 (min-1) (mm/min) (min-1) (mm/min) (min-1) (mm/min) (min-1) (mm/min)
R 0.15
R 0.2 40000 350 40000 260 40000 280 40000 210
R 0.25 40000 480 40000 360 40000 380 40000 290
R 0.3 40000 600 40000 450 40000 480
R 0.4 40000 800 40000 600 40000 640 40000 360
R 0.5 40000 1000 40000 750 40000 800
R 0.75 40000 1500 40000 1100 40000 1200 40000 480
R1 40000 2000 40000 1500 40000 1600 40000 600
R 1.25 40000 2200 40000 1600 40000 1800 40000 880
R 1.5 40000 2800 40000 2200 40000 2200
R2 40000 3200 38000 2200 32000 2000 40000 1200
R 2.5 40000 4000 32000 2600 32000 2600
R3 30000 4200 24000 2800 24000 2700 40000 1300
R4 24000 4400 19000 2800 19000 2800 32000 1400
R5 20000 4000 16000 2800 16000 2600 30000 1400
R6 15000 3600 12000 2400 12000 2300
R8 12000 3600 2000 2300 26000 1700
R10 10000 3200 9500 2200 9600 2000
2800 8000 1800 8000 1800 19000 1800
7500 2500 6000 1600 6000 1600 15000 1800
6000 4800 4800 13000 1800
9600 1500
7600 1300 End mill ap
6400 1400 SOLID END MILLS
4800 1200 R
3800 1000 %
Depth of < 0.2R (R < 0.5) pf
cut
< 0.4R (R > 0.5)
< 0.2R
R:Radius
1) % is the inclination angle of the machined surface.
2) When cutting a very hard workpiece, reduce the feed rate.
3) If the depth of cut is shallow, the revolution and feed rate can be increased.
4) If the rigidity of the machine or the work materials installation is very low, or chattering and noise are generated, reduce the revolution and
feed rate proportionately.
info@mitsubishitools.ru www.mitsubishitools.ru I271