2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN

CARBIDE                                                                             для заказа - info@mitsubishitools.ru

                 DIAMOND COATED END MILLS

                 DF3XB

                 Ball nose, 3 flute, Taper neck, For graphite

                 RECOMMENDED CUTTING CONDITIONS

                 Work material                                Graphite

                 R Neck length      Revolution  Feed rate     Depth of cut  Depth of cut
                                      (min-1)   (mm/min)        ap (mm)       ae (mm)
                 (mm)  (mm)
                                     20000       1100            0.05          0.13
                 R0.5  30            15000         750           0.04          0.11
                       40            12000         500           0.03          0.1
                       50            20000                       0.13          0.4
                                     15000       1800            0.09          0.27
                                40   12000         900           0.07          0.2
                 R1 60               14000         600           0.15          0.45
                                     12000                       0.12          0.35
                                80   10000       1700            0.2           0.5
                                                 1200
                 R1.5  60                        1100
                       80
                                                          ae
                 R2 100

                 Depth of cut                                           ap

SOLID END MILLS  1)	When high machining accuracy is needed, or the workpiece becomes chipped, we recommend lowering the feed rate.
                 2)	Use a milling machine dedicated for graphite.
                 3)	If the rigidity of the machine or the work materials installation is very low, or chattering and noise are generated, reduce the revolution and

                    feed rate proportionately.

I282                                            info@mitsubishitools.ru     www.mitsubishitools.ru