2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN

                                                        для заказа - info@mitsubishitools.ru

                 CBN END MILLS

CBN              CBN2XLRB
                 Corner radius end mill, Medium cut length, 2 flute, Long neck

                 RECOMMENDED CUTTING CONDITIONS

                  Work     Hardened steel (45  55HRC)  Hardened steel (55  62HRC)                      Hardened steel (62  70HRC)
                 material  X40CrMoV51                   X210Cr12                                         C55, 1.3343 (W6Mo5Cr4V2)

                    Dia.   Revolution Feed rate Depth of cut Depth of cut Revolution Feed rate Depth of cut Depth of cut Revolution Feed rate Depth of cut Depth of cut
                   (mm)      (min-1) (mm/min) ap (mm) ae (mm) (min-1) (mm/min) ap (mm) ae (mm) (min-1) (mm/min) ap (mm) ae (mm)

                   0.5      50000 750 0.01 0.2 50000 600 0.01 0.1 40000 400 0.005 0.06
                   1        38000 1100 0.02 0.3 38000 760 0.01 0.2 25000 400 0.01 0.1
                   1.5      25000 900 0.03 0.5 25000 700 0.02 0.4 17000 340 0.02 0.2
                   2        20000 800 0.04 0.7 20000 600 0.03 0.6 12000 300 0.02 0.3

                 Depth of                                                                                                         ae
                    cut
                                                                                                                                             ap

                 1)	If the depth of cut is shallow, the revolution and feed rate can be increased.
                 2)	Oil mist coolant is recommended.
                 3)	Cutting conditions may be considerably different due to the overhang (milling depth), depth of cut, and machine tool. Please see the above

                    table as a standard.

SOLID END MILLS

I288                                                    info@mitsubishitools.ru  www.mitsubishitools.ru