2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
iMX-S3HV
Square head, 3 flute, Illegular helix
RECOMMENDED CUTTING CONDITIONS SQUARE
y Plunging
Carbon steel, Alloy steel, Mild Steel, Copper, Pre-hardened steel, Carbon steel, Alloy steel, Austenitic stainless steel,
Work Copper alloys Alloy tool steel Ferritic, Precipitation hardening stainless steel,
material Titanium alloy
Dia. Cutting speed Revolution Feed Feed rate Drilled Depth Step Cutting speed Revolution Feed Feed rate Drilled Depth Step Cutting speed Revolution Feed Feed rate Drilled Depth Step BALL
(mm) (m/min) (min-1) (mm/rev) (mm/min) ap (mm) ap (mm) (m/min) (min-1) (mm/rev) (mm/min) ap (mm) ap (mm) (m/min) (min-1) (mm/rev) (mm/min) ap (mm) ap (mm)
10 100 3200 0.14 450 5 2.5 70 2200 0.09 200 5 2 60 1900 0.03 57 5 0.6
12
16 100 2700 0.14 380 6 2.5 70 1900 0.09 170 6 2 60 1600 0.03 48 6 0.6
20
25 100 2000 0.14 280 8 2.5 70 1400 0.09 130 8 2 60 1200 0.03 36 8 0.6
100 1600 0.14 220 10 2.5 70 1100 0.09 100 10 2 60 950 0.03 29 10 0.6
100 1300 0.14 180 12.5 2.5 70 890 0.09 80 12.5 2 60 760 0.03 23 12.5 0.6 RADIUS
Depth of ap
cut
Precipitation hardening stainless steel,
Work Cobalt chromium alloy
material
Dia. Cutting speed Revolution Feed Feed rate Drilled Depth Step INDEXABLE HEAD END MILLS
(mm) (m/min) (min-1) (mm/rev) (mm/min) ap (mm) ap (mm)
10 40 1300 0.03 39 5 0.6
12 40 1100 0.03 33 6 0.6
16 40 800 0.03 24 8 0.6
20 40 640 0.03 19 10 0.6
25 40 510 0.03 15 12.5 0.6
Depth of ap
cut
1) For stainless steel, titanium alloy and heat resistant alloy, the use of water-soluble coolant is effective.
2) The irregular helix flute end mill has a larger effect on controlling vibration when compared to standard end mills.
However, if the rigidity of the machine or the workpiece installation is poor, vibration or abonrmal sound can occur.
In this case, please reduce the revolution and feed rate proportionately, or set a lower depth of cut.
info@mitsubishitools.ru www.mitsubishitools.ru I341
