2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN

                                                               для заказа - info@mitsubishitools.ru

                ROTATING TOOLS

                  RECOMMENDED CUTTING CONDITIONS

                y VOX400 (Standard pitch)

                    Work Material       Tensile  Insert Grade  Cutting Speed   Radial Depth of Cut                     & 50  & 250                   Feed per Tooth
                K                      Strength                   (m/min)               ae (mm)                   Depth of Cut                          fz (mm/tooth)
                                       < 200MPa                                            < D1                                                         0.4(0.3  0.5)
                      Gray Cast Iron   < 350MPa  MC5020        300(250  350)              < D1                       ap (mm)                           0.4(0.3  0.5)
                                       < 450MPa  VP15TF        250(200  300)              < D1                         < 10                            0.3(0.2  0.4)
                    Ductile Cast Iron  < 800MPa  MC5020        220(150  300)              < D1                         < 10                            0.3(0.2  0.4)
                                                 VP15TF        200(150  300)              < D1                         < 10                            0.3(0.2  0.4)
                                                 MC5020        200(150  250)              < D1                         < 10                            0.3(0.2  0.4)
                                                 VP15TF        170(150  200)              < D1                         < 10                            0.2(0.1  0.3)
                                                 MC5020        170(150  200)              < D1                         < 10                            0.2(0.1  0.3)
                                                 VP15TF        150(100  200)                                           < 10
                                                                                                                        < 10

                y VOX400 (Fine pitch)

                    Work Material       Tensile  Insert Grade  Cutting Speed                      & 50,& 63       Feed per Tooth Radial Depth of Cut       & 80     Feed per Tooth
                K                      Strength                     (m/min)    Radial Depth of Cut Depth of Cut                                       Depth of Cut
                                       < 200MPa                                ae (mm)              ap (mm) fz (mm/tooth) ae (mm)                     ap (mm) fz (mm/tooth)
                      Gray Cast Iron   < 350MPa
                                                 MC5020 300(250  350)         < D1                 <10 0.4(0.3  0.5)