2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
RECOMMENDED CUTTING CONDITIONS
y CUTTING SPEED
Insert Cutting Width ae (mm)
0.150.3D1
Work Material Hardness Grade Breaker <0.15D1 D1 (Slot)
1st Recommenedation 2nd Recommenedation Cutting Speed vc (m/min)
200(160250) 160(120200) 140(120160)
P Mild Steel < 180HB MP6120 VP15TF MH 170(130220) 130(90170) 110(90130)
MP6130 VP20RT MH 160(120200) 120(100140) 100(80120)
Carbon Steel 180350HB MP6120 VP15TF MH 130(90170) 90(70110) 70(5090)
Alloy Steel MP6130 VP20RT MH 160(120200) 120(100140) 100(80120)
MP7130 VP15TF MH 230(180280) 190(140240) 190(140240)
M Stainless Steel < 270HB MC5020 H 190(140220) 170(120220) 170(120220)
K Gray Cast Iron < 350MPa MC5020 VP15TF H
< 800MPa MP9120 VP20RT HM 50(4070) 50(4070)
Ductile, Cast Iron MP9130 VP15TF HM 40(30 60) 40(30 60)
MP9120 VP20RT HM 40(30 60) 40(30 60)
S Titanium Alloy < 350HB MP9130 HM 30(2040) 30(2040)
Heat-resistant Alloy
y DEPTH OF CUT / FEED PER TOOTH
Work Material Hardness Cutting Width Depth of Cut Feed per Tooth fz (mm/tooth)
ae (mm) ap (mm) Cutter Diameter (mm)
40 Length of cut 56mm 50 Length of cut 56mm 50 Length of cut 84mm
50 Length of cut 42mm 63 Length of cut 56mm
P <180HB < 0.3D1 <20 0.25 0.25 0.20
Mild Steel D1 (Slot) 2050 0.20 0.20 0.15
5080 0.10
Carbon Steel 180350HB < 0.3D1 0.20 0.20 0.15
Alloy Steel D1 (Slot) <20 0.15 0.15
< 0.3D1 2050 0.25 0.25 0.20
M <270HB D1 (Slot) 0.20 0.20 0.15
Stainless Steel < 0.15D1 <20 0.10
2050 0.15 0.15 0.10
K 5080 0.10 0.10
0.25 0.25 0.20
Gray Cast Iron Tensile Strength 0.150.3D1 <20 0.20 0.20 0.15 ROTATING TOOLS
<350MPa 2050 0.10
0.10 0.10 0.07
<20 0.30 0.30 0.25
2050 0.25 0.25 0.20
5080 0.15
0.25 0.25 0.20
<10 0.20 0.20 0.15
<10 0.10
1050
5080
<10
1050
5080
D1 (Slot) <10 0.25 0.25 0.20
1050 0.20 0.20 0.15
< 0.15D1 <20 0.25 0.25 0.20
2050 0.20 0.20 0.15
5080 0.10
Ductile, Cast Iron Tensile Strength 0.150.3D1 <20 0.20 0.20 0.15
<800MPa 2050 0.15 0.15 0.10
5080 0.07
D1 (Slot) 0.15 0.15 0.10
<10 0.10 0.10
1050
S < 350HB < 0.15D1 <20 0.10 0.10
Titanium Alloy 2050 0.10 0.10
D1 (Slot) 0.08 0.08
Heat-resistant Alloy < 0.15D1 <50 0.07 0.07
D1 (Slot) <10 0.05 0.05
<20
(Note) The above cutting conditons are determined based on high rigidity machine and workpiece, where no vibration occurred.
Please adjust the machining conditions if vibration is generated.
SCREW-IN ARBORS K118 K043
SPARE PARTS M001
TECHNICAL DATA N001
info@mitsubishitools.ru www.mitsubishitools.ru