2014-Полный каталог по сверлам EN

                                                                        Для заказа - info@mitsubishitools.ru

 Solid Carbide Drill
 for Die & Mould Machining

MHS

y Features

Stable machining can be obtained due to the unique cutting edge geometry & double margin flute

                                                Wavy cutting edge                                                            Guide pad

                                                The wave edge design achieves                                             General guide
                                                a sharp peripheral edge cutting                                           pad location
                                                performance with a strong initial
                                                cutting point near the centre.                                            MHS Competitor's drill

                                                 Double margin

                                                Unique guide pad design
                                                reduces the time from starting
                                                until the moment when all 4
                                                guide pads are in contact and
                                                so improves stability.

                                                                       Margin                                             2-contact points
                                                                                                                          4-contact points
Strong geometry for stable machining of moulds

                                                                                                                     150
                                                                                   Relative buckling strength (%)
                                                                                   100
                                                                                                                                             DRILLING MHS DRILLS
                                                                                   50

                                                                                                                                                  FEATURES

                                                                                   0                                      MHS

                                                                                          Conventional drill

Web thickness                        Helix angle                                                  37% increase in rigidity.
                                                                                   (Compared to other Mitsubishi Materials drills)
In comparison with conventional     In comparison with conventional
drills a larger web thickness is    drills, a lower helix angle is used
used to increase overall rigidity.  to maintain cutting edge strength.

 Tough carbide grade

aLong tool life MIRACLE® coated VP15TF

                                    MIRACLE ®      Features of VP15TF
                                      coating
                                      (Al,Ti)N  Miracle coated VP15TF is suitable for the
                                                machining of 35 55HRC mould materials.
                                    Cemented
                                      carbide        info@mitsubishitools.ru
                                     substrate        www.mitsubishitools.ru
                                       TF15

VP15T                                                                                                                                             D127