2014-Полный каталог по сверлам EN

                                                                                           Для заказа - info@mitsubishitools.ru  UWC VP                  140°

                      DRILLING (SOLID CARBIDE)                                                                                                                 Thinning

                     MHE

                     P MK S N H

                                                                                        D1                                      L3
                                                                                                                                 L2
                                                                                                                       VP15TF
                                                                                                                                                     L1
                                                                                                                                                                                   D4
                                 Stock                         Dimensions (mm)                                                   Stock                   Dimensions (mm)

                     Drill Dia.  VP15TF                        L3 L1 L2                   Drill Dia.                                                     L3 L1 L2
                                                                                              D1
                        D1                                                                   (mm)
                        (mm)
                                                                                        13.0  13.5
                     10.0 10.2  q 43 87 43                                             13.5  14.0                              q 54 104 54
                                                                                        14.0  14.2                              q 54 104 54
                     10.2 10.5  q 43 87 43                                             14.2  14.5                              q 56 104 56
                                                                                        14.5  15.0                              q 56 108 56
                     10.5 10.7  q 43 87 43                                             15.0  15.5                              q 56 108 56
                                                                                        15.5  16.0                              q 58 112 58
                     10.7 11.0  q 47 93 47                                             16.0  16.5                              q 58 112 58
                                                                                        16.5  17.0                              q 60 116 60
                     11.0 11.2  q 47 93 47                                             17.0  17.5                              q 60 116 60
                                                                                        17.5  18.0                              q 62 119 62
                     11.2 11.5  q 47 93 47                                                                                      q 62 119 62

                     11.5 11.9  q 47 93 47

                     11.9 12.0  q 51 100 51

                     12.0 12.5  q 51 100 51

                     12.5 13.0  q 51 100 51

DRILLING MHE DRILLS  Note) Contact Mitsubishi Materials for any geometry that is
                              not shown above.

                                   Product Range

                     Drill dia. : 1018mm
                     Drilling depth: L/D <1 (L: hole depth; D: drill dia.)
                     Dimensions : Flute length is less than 4 times the drill diameter; Shank length will be determined based on present standards.
                     Tool grade : VP15TF

 10.0 ~              Notes When Regrinding and Recoating the Drill
   18.0
                     • When carrying out regrinding, it is necessary to recoat the drill to maintain tool life.
                     • When requesting regrinding and recoating of the drill, contact Mitsubishi Materials sales staff.

D142                 a : Stock Standard.                       info@mitsubishitools.ru
                                                               www.mitsubishitools.ru
                     s : Stock Standard in Japan.

                     r : Non stock, produced to order only.
                     q : Special Tool, produced to order only