2014-Полный каталог по сверлам EN
Для заказа - info@mitsubishitools.ru
VIOLET DRILLS
VAPDSSUS VAPDMSUS
VIOLET DRILLS, High precision, For stainless steel, Short/Medium flute length
P MK S N H
yVAPDSSUS, VAPDMSUS
Stainless steel
Work Austenitic Martensitic Carbon steel Cf53 Structural steel
material X5CrNi1810 Ferritic X10CrA118 Alloy steel 070M55 Aluminium alloy
X5CrNiMo17122
Cast iron
Copper, Copper alloy
DRILLING VIOLET DRILLS Dia. Revolution Feed rate Revolution Feed rate Revolution Feed rate Revolution Feed rate
(mm) (min-1) (mm/rev) (min-1) (mm/rev) (min-1) (mm/rev) (min-1) (mm/rev)
0.5 7,600 0.01 8,800 0.01 11,250 0.01 15,000 0.02
1.0 4,800 0.02 6,300 0.05 10,000 0.05 12,000 0.05
2.0 2,400 0.04 3,200 0.06 0.09 0.09
3.0 1,600 0.07 2,100 0.10 5,500 0.13 6,400 0.13
4.0 1,200 0.09 1,600 0.10 3,700 0.15 4,300 0.15
5.0 0.12 1,300 0.13 2,800 0.18 3,200 0.18
6.0 950 0.14 1,100 0.15 2,200 0.20 2,600 0.19
8.0 800 0.18 0.18 1,800 0.22 2,100 0.24
10.0 600 0.22 800 0.21 1,400 0.25 1,600 0.28
12.0 480 0.24 640 0.25 1,100 0.30 1,300 0.34
13.0 400 0.26 530 0.28 0.32 1,100 0.36
14.0 370 0.30 490 0.27 930 0.31 1,000 0.36
15.0 340 0.31 450 0.28 860 0.32 0.38
16.0 320 0.32 425 0.30 730 0.34 930 0.42
18.0 300 0.34 400 0.32 680 0.36 870 0.43
20.0 270 0.36 350 0.35 640 0.38 820 0.45
240 320 570 725
510 660
1) Please reduce the revolution and feed rate when the workpiece clamping lacks rigidity or the machine has limitations.
2) Please use a collet type drill chuck.
3) Use sufficient cutting fluid.
4) Do not peck drill and reduce the cutting conditions when drilling depths exceed 3D (D : drill diameter).
The above mentioned cutting conditions are standard when using water soluble cutting fluid.
Please reduce the revolutions when using non-water soluble cutting fluid.
CUTTING
DATA
D210 info@mitsubishitools.ru
www.mitsubishitools.ru