2014-Полный каталог по сверлам EN

                        VIOLET DRILLS                                Для заказа - info@mitsubishitools.ru

                        VSD

                         VIOLET DRILLS, Straight shank

                        y VSD

                                  Structural steel       Carbon steel Ck55      Stainless steel X20Cr13  Stainless steel X5CrNi1810
                                                                                                             Tool steel X210Cr12
                         Work
                        material                                                                          (Low-hardness materials)
                                                                                                                Heat-treated steel
                                                                                                               W.Nr. 1.2344(H13)
                                                                                                                   ( 40HRC)

                        Cutting   40m/min                30m/min                20m/min                    10 14m/min
                        speed
DRILLING VIOLET DRILLS            Revolution  Feed rate  Revolution  Feed rate  Revolution  Feed rate    Revolution  Feed rate
                          Dia.      (min-1)   (mm/rev)     (min-1)   (mm/rev)     (min-1)   (mm/rev)       (min-1)   (mm/rev)
                         (mm)
                                  15,000        0.01     11,250        0.01      7,500        0.01        5,620       0.01
                          0.5     10,000        0.02       7,500       0.02      5,000        0.02        3,750       0.02
                          1.0                   0.03       6,150       0.03      4,100        0.03        2,800       0.03
                          1.5       8,200       0.05       4,780       0.05      3,180        0.05        2,200       0.04
                          2.0       6,370       0.10       3,180       0.10      2,120        0.07        1,400       0.06
                          3.0       4,250       0.13       2,390       0.13      1,590        0.09        1,100       0.08
                          4.0       3,180       0.15       1,910       0.15      1,270        0.11                    0.10
                          5.0       2,550       0.18       1,590       0.18      1,060        0.13           860      0.11
                          6.0       2,120       0.20       1,360       0.20                   0.14           720      0.12
                          7.0       1,820       0.22       1,190       0.21         910       0.15           610      0.13
                          8.0       1,590       0.24       1,060       0.22         800       0.17           540      0.14
                          9.0       1,420       0.26         960       0.23         710       0.18           480      0.15
                        10.0        1,270       0.28         870       0.24         640       0.19           430      0.16
                        11.0        1,160       0.30         800       0.25         580       0.20           390      0.17
                        12.0        1,060       0.30         730       0.26         530       0.20           360      0.17
                        13.0                                                        490                      330
                                      980

                        1) Please reduce the revolutions when the workpiece clamping lacks rigidity.
                        2) Do not peck drill and reduce the cutting conditions when drilling depths exceed 3D (D : drill diameter).
                        3) The above-mentioned cutting conditions are standard when using water-soluble cutting fluid.

                           Please reduce the revolutions when using non-water-soluble cutting fluid.

CUTTING
     DATA

D216                                                                            info@mitsubishitools.ru
                                                                                www.mitsubishitools.ru