2014-Полный каталог по сверлам EN

                                              Для заказа - info@mitsubishitools.ru

                                         DRILL SELECTION CHART STEEL

a Mini Solid Carbide Drills

                                                                                    Shank Type Page Number

 Size Hole                    Drill ToleranceDrillShape
Range Depth                                                                                                              Internal CoolantType/
                                Series            *Pilot Drill for MSE
                                                                                                                               Coating
(mm) (L/d)                           0-                                                        DIN DIN
                                                                                                                                                             (whistle notch)-0.0096535HE 6535HA
                                                                                                                                                                       (cylindrical)
                  5-12      0~                                                                                                                                                   (cylindrical)MSEVPD026 D029
& 0.10-& 3.0            -0.009           MSP
                                                                                                                                                                  Dimensions
             --                                                                                                                                                          CuttingVP D028 D029

&0.70-&3.0 -100             0~                                                                                                                                               ConditionsMGSD090 D091
                        -0.005
                                                                                                                                             DRILLING DRILL SELECTION CHART - 1ST RECOMMENDATION FOR STEEL
&0.5-&2.95 1                0~  MWS...SB                                            VP D033 D056
                        -0.014

& 0.5-& 2.9  5                * MWS...LB                                            VP D033 D056
             12               * MWS...XB                                            VP D033 D056

             20 * MWS..X20DB                                                        VP D035 D056

&1.0-&2.95 25                 * MWS...X25DB                                         VP D035 D056

                      30 * MWS...X30DB                                              VP D035 D056
*Note: Manufacturers Standard. For more details please refer to the product page.

                                                                                                                      DRILL
                                                                                                                      NAVI

                                              info@mitsubishitools.ru                                                 D005
                                              www.mitsubishitools.ru