2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
ROTATING TOOLS
INSERTS
Stock Dimensions (mm)
Coated L1 L2 L3 S1 F1 Re
Shape Order Number Geometry
ROTATING TOOLS
MP9030XNMU190912R-MSa19.1 9.5 12.7 8.5 1.0 1.2 Re L1
MP9130190916R-MSa19.1 9.5 12.7 8.5 1.0 1.6 Re L1
190924R-MS a 19.1 9.5 12.7 8.5 1.0 2.4
L3 F1 L3 F1 L3 F1a20.2 9.5 12.7 8.5 3.2
L2 L2 L2*1 190932R-MSa21.8 9.5 12.7 8.5 4.0
S1 S1 S1*1 190940R-MSa21.8 9.5 12.7 8.5 5.0
*1 190950R-MS a 19.1 9.5 12.7 8.5 1.0 1.2
XNMU190912R-HS
XNMU190912R-LS a 19.1 9.5 12.7 8.5 1.0 1.2
Re L1
*1 Note for insert with a corner radius of 3.2 and above, as corner radius increases the L1 dimension increases. =
Corner radius 3.2: L1+0.7mm Corner radius 4.0: L1+1.5mm Corner radius 5.0: L1+1.5mm
RECOMMENDED CUTTING CONDITIONS
y VFX6
Work Material Cutting Number of Recommended vc n apmax ae fz vf Q Pc Expected TL
Edge (min-1) (mm) (mm) (mm/tooth) (mm/min) (cm3/min) (kW) Torque (%)
Diameter Flutes Insert (m/min)
(mm) (Nm)
S 4 LS 40 202 60 63 0.10 81 306 13.4 634 40
&63 4
4 MS 50 253 60 38 0.10 101 229 9.5 357 60
4
MS 60 303 60 25 0.10 121 183 7.2 228 80
5
5 HS 60 303 60 13 0.12 146 110 4.7 148 100
5
5 LS 40 159 75 80 0.10 80 477 20.8 1250 40
Titanium Alloy &80 6 MS 50 199 75 48 0.10 99 358 14.7 705 60
(Ti-Al-4V) 6
6 MS 60 239 75 32 0.10 119 286 11.2 449 80
6
HS 60 239 75 16 0.12 143 172 7.3 291 100
4
4 LS 40 127 90 100 0.10 76 688 29.6 2218 40
4
&100 4 MS 50 159 90 60 0.10 95 516 20.9 1252 60
5 MS 60 191 90 40 0.10 115 413 16.0 798 80
5
5 HS 60 191 90 20 0.12 138 248 10.3 517 100
5
LS 25 126 60 63 0.08 40 153 7.0 527 30
6
&63 6 MS 25 126 60 38 0.08 40 92 4.0 303 50
6
6 MS 30 152 60 25 0.10 61 92 3.8 241 70
HS 30 152 60 13 0.10 61 46 2.1 133 80
LS 25 99 75 80 0.08 40 239 10.8 1038 30
Titanium Alloy &80 MS 25 99 75 48 0.08 40 143 6.2 597 50
(Ti-5Al-5V-5Mo-3Cr)
MS 30 119 75 32 0.10 60 143 5.9 475 70
HS 30 119 75 16 0.10 60 72 3.3 263 80
LS 25 80 90 100 0.08 38 344 15.3 1841 30
&100 MS 25 80 90 60 0.08 38 206 8.8 1059 50
MS 30 95 90 40 0.10 57 206 8.4 844 70
HS 30 95 90 20 0.10 57 103 4.7 466 80
*1 Please note that machining performance differs according to conditions such as the rigidity of the machinery used, workpiece clamping
rigidity, the coolant supply system pressure and flow.
*2 Internal coolant is recommended. For the tool holder, use an FMH arbor with a through coolant system. Use with external lubricating
coolant is also effective.
3 TL: Based on ae= outer diameter x 20%
**4 Maximum depth of cut, ap should be changed depending on machine rigidity and power.
a : Inventory maintained. SPARE PARTS M001
TECHNICAL DATA N001
K086
info@mitsubishitools.ru www.mitsubishitools.ru