2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
TITANIUM ALLOY Roughing
MILLING
L7
VFX6 L8
a High performance D1
D8
titanium alloy milling. W1
a Vertical inserts with high
Mass D9
strength cutting edge.
a Screw-on type. D7
ap(Max. Depth of Cut)
L1
Right hand tool holder only.
y SHELL TYPE
Order Number Stock Dimensions (mm)
Number of Flutes
Total
R D1 L1 D9 L7 D8 D7 W1 L8 ap (kg)
VFX6-063A04A031R a 48 63 60 27 28 12.5 61 12.4 7 31 0.9
-063A04A060R a 4 16 63 85 27 7 60 1.3
-080A05A031R a 5 10 80 60 32 28 12.5 61 12.4 8 31 1.5
-080A05A075R a 5 25 80 100 32 8 75 2.6
-100A06A031R a 6 12 100 65 40 28 16.5 77.3 14.4 9 31 2.7
-100A06A090R a 6 36 100 115 40 9 90 4.8
28 16.5 77.3 14.4
30 20.5 96.6 16.4
30 20.5 96.6 16.4
SPARE PARTS
*2 *3 Number of Insert
Order Number End cutting *Peripheral 1
edge
Clamp Screw Number Seal Washer Wrench Coolant Nozzle Number Anti-seize Lubricant Set Bolt cutting edge
XNMU1909 XNMU1909
TKY20T ooR-oo 12R-oo
TKY20T
VFX6-063A04A031R TS450 8 W12-S1 TKY20T HSD04004H08 12 MK1KS HSC12045 44
-063A04A060R TS450 16 W12-S1 TKY20T HSD04004H08 20 MK1KS HSC12070
-080A05A031R TS450 10 W16-S1 TKY20T HSD04004H08 15 MK1KS HSC16040 4 12
-080A05A075R TS450 25 W16-S1 TKY20T HSD04004H08 30 MK1KS HSC16080
-100A06A031R TS450 12 W20-S1 HSD04004H08 18 MK1KS HSC20040 55 ROTATING TOOLS
-100A06A090R TS450 36 W20-S1 HSD04004H08 42 MK1KS HSC20090
5 20
66
6 30
1 Only corner radius R1.2 can be used for the peripheral cutting edges except the end cutting edge.
*2 Clamp Torque (N • m) : TS450=5.0
**3 Coolant nozzles are available with varying diameters for adjusting coolant pressure. Select nozzles as required by the specification.
< 1Mpa Standard > 5Mpa > 7Mpa
( < 20 l/min.) ( > 30 l/min.) ( > 50 l/min.)
Nozzle Dia. 0.6mm 0.8mm 1.2mm 1.6mm
Order Number HSD04004H06 HSD04004H08 HSD04004H12 HSD04004H16
* Clamp Torque (N • m) : HSD04004Hpp=1.5
4 The part number for a blank screw without a through nozzle is HSS04004.
*5 Note for insert with a corner radius of 3.2 and above, as corner radius increases the L1 dimension increases.
* Corner radius 3.2: L1+0.7mm Corner radius 4.0: L1+1.5mm Corner radius 5.0: L1+1.5mm
a : Inventory maintained. SPARE PARTS M001
TECHNICAL DATA
N001 K085
info@mitsubishitools.ru www.mitsubishitools.ru