2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
ROTATING TOOLS
ARBORS
ARBORS FOR SCREW-IN TOOLS
y STRAIGHT SHANK ARBOR
Type Order Number Stock Dimensions (mm)
WC STEEL SHANK TYPE SC16M08S100S D9 D4 D5 L1 L2 H1 M
08S200L s 8.5 16 14.5 100 10 10 M8
ROTATING TOOLS M H1D4CARBIDE SHANK TYPE SC20M10S120S s 8.5 16 14.5 200 10 10 M8
D5 L2 10S220L s 10.5 20 18.5 120 10 14 M10
D9 SC25M12S125S s 10.5 20 18.5 220 10 14 M10
L1 12S245L s 12.5 25 23.5 125 10 19 M12
SC32M16S140S s 12.5 25 23.5 245 10 19 M12
16S280L s 17 32 28.5 140 15 24 M16
SC16M08S100SW s 17 32 28.5 280 15 24 M16
08S200LW s 8.5 16 14.5 100 10 10 M8
SC20M10S120SW s 8.5 16 14.5 200 10 10 M8
10S220LW s 10.5 20 18.5 120 10 14 M10
SC25M12S125SW s 10.5 20 18.5 220 10 14 M10
12S245LW s 12.5 25 23.5 125 10 19 M12
SC32M16S140SW s 12.5 25 23.5 245 10 19 M12
16S280LW s 17 32 28.5 140 15 24 M16
s 17 32 28.5 280 15 24 M16
HOW TO INSTALL THE SCREW-IN HEAD
zThoroughly clean the clamp section of the head and the
arbor with an air blower or brush before installation.
xTighten the head at the recommended torque and ensure
that there is no gap between the head and arbor.
Screw Size Recommended Torque Wrench Size
(N • m) (mm)
M8 23 10
M10 46 14
M12 80 19
M16 90 24
aCutting tools become extremely hot during cutting. Never touch them with bare hands after operation as this may produce risk of
injuries or burns.
aDo not handle the cutting tools with bare hands as this may cause injuries.
CUTTER TYPE
ASX400 ^ K027 BRP ^ K075
APX3000 ^ K032 RRD ^ K079
SRF ^ K093
APX4000 ^ K038 SUF ^ K097
SRM2 ^ K101
AQX ^ K056 PMC ^ K116
AJX ^ K063
OCTACUT ^ K073
s : Inventory maintained in Japan.
K118 info@mitsubishitools.ru www.mitsubishitools.ru