2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN

                                                                                              для заказа - info@mitsubishitools.ru

                           CBN & PCD TURNING INSERTS

CBN & PCD TURNING INSERTS  a Roll                                 Grade                   Recommended Cutting Conditions
                                                                MB8025
                                     Work Material                       Cutting Speed (m/min)                                      Feed (mm/rev)     Depth of Cut (mm)
                                                                MB710
                                       Cast Steel                        80 (30  130)                                              0.3 (0.1  0.5)   0.2  3.0
                                 Adamite Cast Steel             MB8025
                                                                MB730    80 (30  130)                                              0.3 (0.1  0.5)   0.2  3.0
                                   Ductile Cast Iron      MB730, MBS140
                                 Granular Cast Iron                      80 (30  130)                                               0.3 (0.1  0.5)  0.2  3.0
                                   Chilled Cast Iron                     50 (20  70)                                               0.25 (0.1  0.4)  0.1  3.0
                               High Chromium Steel                       20 (10  30)
                                                                                                                                           0.2          0.2
                                   High Alloy Steel
                                  High Speed Steel
                                 Cemented Carbide

                           aHeat Resistant Alloy          Grade                           Recommended Cutting Conditions

                                     Work Material        MB730          Cutting Speed (m/min)                                      Feed (mm/rev)     Depth of Cut (mm)
                                                          MB730
                            Ni Base Heat Resistant Alloy                 120 (100  150)                                             0.2              0.5
                                     (e.g. Inconel)
                                                                         70 (50  100)                                               0.2              0.5
                           Co Base Heat Resistant Alloy
                                     (e.g. Stellite)

B010                                                      info@mitsubishitools.ru  www.mitsubishitools.ru