2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN

                                                 для заказа - info@mitsubishitools.ru

                 TURNING INSERTS

TURNING INSERTS  OPTIMUM GRADES AND CHIP BREAKERS FOR EXTERNAL TURNING

                 Finish Cutting                                                                           Stable Cutting
                                                                                                          General Cutting
                   FJ                                                                                     Unstable Cutting

                  VP10RT                                                                           F Finish Cutting

                  FJ

                 VP10RT

                  FJ

                 VP10RT

                 S Ni, Co-Based Alloy (ex. Inconel®718)                1st Recommendation                       vc	 : Cutting Speed
                              7° POSITIVE INSERTS WITH HOLE                                                     	 f	 : Feed
                                                                                                                ap	: Depth of Cut
                                   Cutting Area  Chip Breaker  Grade                   vc (m/min)  f (mm/rev)
                                                       FJ                                                           ap (mm)
                 Stable Cutting        F               FJ      VP10RT                  20  45     0.04  0.12    0.20  1.40
                 General Cutting       F               FJ                                                         0.20  1.40
                 Unstable Cutting      F                       VP10RT                  20  45     0.04  0.12    0.20  1.40

                                                               VP10RT                  20  45     0.04  0.12

A022                               info@mitsubishitools.ru     www.mitsubishitools.ru