2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN

                                                                      для заказа - info@mitsubishitools.ru

                 MSTAR END MILLS

CARBIDE          MS2MT
                 Taper end mill, Medium cut length, 2 flute

                   RECOMMENDED CUTTING CONDITIONS

                 y Slotting

                              Carbon steel, Cast iron,                Alloy steel, Tool steel,                          Hardened steel (45  55HRC)
                  Work Alloy steel (  30HRC)                         Pre-hardened steel
                                                                                                                        X40CrMoV51
                 material Cf53, GG25                                  X40CrMoV51

                  Small     Revolution  Feed rate       Depth of cut  Revolution  Feed rate     Depth of cut               Revolution  Feed rate     Depth of cut
                 Mill Dia.    (min-1)   (mm/min)            (mm)        (min-1)   (mm/min)          (mm)                     (min-1)   (mm/min)          (mm)

                  (mm)       40000        320             0.005        40000        180           0.004                     40000        100           0.002
                             40000        400             0.006        40000        220           0.005                     35000        130           0.003
                  0.2        40000        450             0.008        40000        270           0.006                     31000        150           0.004
                  0.3        37000        500             0.010        32000        320           0.008                     25000        160           0.005
                  0.4        32000        530             0.013        26000        340           0.010                     21000        170           0.006
                  0.5        27000        560             0.015        23000        380           0.011                     18000        180           0.007
                  0.6        24000        610             0.018        20000        410           0.013                     16000        210           0.008
                  0.7        21000        610             0.020        18000        450           0.015                     14000        210           0.009
                  0.8        19000        610             0.025        16000        450           0.020                     13000        210           0.010
                  0.9        13000        720             0.040        11000        540           0.030                                  270           0.015
                  1                                                                                                           8500
                  1.5

                 Depth of                                                                       Please refer to the list.
                    cut

SOLID END MILLS  y Shoulder milling

                              Carbon steel, Cast iron,  Alloy steel, Tool steel,                Hardened steel (45  55HRC)
                  Work Alloy steel (  30HRC)           Pre-hardened steel
                                                                                                X40CrMoV51
                 material Cf53, GG25                    X40CrMoV51
                                                                                                    Revolution
                  Small     Revolution  Feed rate       Revolution                Feed rate            (min-1)    Feed rate
                 Mill Dia.    (min-1)   (mm/min)          (min-1)                 (mm/min)                        (mm/min)
                                                                                                      6400
                  (mm)        9500        720             8000                      540               5000          300
                              7800        800             6300                      540               4200          300
                   2          6400        800             5300                      540               3200          300
                   2.5        4800        800             4000                      540               2500          300
                   3          3800        800             3200                      540               2100          300
                   4          3200        800             2600                      540               1600          300
                   5          2400        700             2000                      480               1300          270
                   6          1900        600             1600                      410                             240
                   8                                                                                     < 0.03D
                 10                         < 0.05D       < 2.5D                                                  < 2.5D

                 Depth of
                    cut

                                                                                                                                                                        D:End point diameter

                 1)	If the depth of cut is shallow, the revolution and feed rate can be increased.
                 2)	If the rigidity of the machine or the work materials installation is very low, or chattering and noise are generated, reduce the revolution and

                    feed rate proportionately.

I102                                                    info@mitsubishitools.ru                 www.mitsubishitools.ru