2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
IMPACT MIRACLE END MILLS
CARBIDE VF6MHVRBCH UWC VF 43.5°
45°
Corner radius end mill, Medium cut length, 6 flute, Copper Alloy Aluminium Alloy
Irregular helix flutes, with multiple internal through coolant holes
L1 Type1
Carbon Steel, Alloy Steel, Cast Iron Tool Steel, Pre-Hardened Steel, Hardened Steel Hardened Steel Hardened Steel Austenitic Titanium Alloy,
(<30HRC) ( < 45HRC) ( < 55HRC) Stainless Steel Heat Resistant Alloy
(>55HRC)
e e
SQUARE CoolStar D1
D4(h6)
END MILLS ap
R
BALL 0.5 12
0 0
- 0.020 - 0.030
D4=10 D4=12 D4=16 D4=20
h6 0 0 0 0
RADIUS - 0.009 - 0.011 - 0.011 - 0.013
aVibration control corner radius end mill with multiple internal through coolant holes ensures stable machining on
difficult-to-cut materials and applications requiring long overhangs. Unit : mm
TAPER Order Number D1 R ap L1 D4 Flutes Stock Type
VF6MHVRBCHD1000R050 10 0.5 22 70 10 6 a 1
D1000R100 10 1 22 70 10 6 a 1
D1200R050 12 0.5 26 75 12 6 a 1
SOLID END MILLS D1200R100 12 1 26 75 12 6 a 1
D1600R100 16 1 32 90 16 6 a 1
D1600R300 16 3 32 90 16 6 a 1
D2000R100 20 1 38 100 20 6 a 1
D2000R300 20 3 38 100 20 6 a 1
RECOMMENDED CUTTING CONDITIONS y Trochoid milling
y Shoulder milling Austenitic stainless steel,
Work Titanium alloy
Austenitic stainless steel, Heat resistant alloys material X5CrNi1810, X5CrNiMo17-12-2
Work Titanium alloy Inconel718
material X5CrNi1810, X5CrNiMo17-12-2,
Ti6Al4V
Dia. Revolution Feed rate Revolution Feed rate Dia. Revolution Feed rate
(mm) (min-1) (mm/min) (min-1) (mm/min) (mm) (min-1) (mm/min)
10 4800 2000 1300 260 10 4800 1400
12 4000 2000 1100 230 12 4000 1200
16 3000 1600 180 16 3000 1100
20 2400 1400 800 150 20 2400
640 900
< 0.1D < 0.05D 1.5D<
Depth of 0.5D 1.5D 0.5D 1.5D < 0.1D
cut
Depth of
cut
D:Dia.
0.5D 1.5D
D:Dia.
1) If the depth of cut is shallow, the revolution and feed rate can be increased.
2) The irregular helix flute end mill has a larger effect on controlling vibration when compared to standard end mills. However, if the rigidity of
the machine or the workpiece installation is poor, vibration or abonrmal sound can ocur. In this case, please reduce the revolution and feed
rate proportionately, or set a lower depth of cut.
a : Inventory maintained.
I206 info@mitsubishitools.ru www.mitsubishitools.ru