2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN

                                                           для заказа - info@mitsubishitools.ru

                 TURNING INSERTS

TURNING INSERTS  RECOMMENDED CUTTING CONDITIONS

                 y NEGATIVE INSERTS                                                                                          Breaker : Std : Standard Flat : Flat Top

                          Work Material          Hardness  Cutting  Priority Breaker      Grade  Cutting Speed                 Feed       Depth of Cut
                 M                                          Mode                                     (m/min)                 (mm/rev)         (mm)
                                                                                          US735
                   Hardened Stainless Steel      <450HB    M5                       MA   MC7025  50  95                     0.20  0.50  0.30  4.00
                 (X5CrNiCuNb16-4, X7CrNiAl17-7)            R1                       RM    US735  80  105                    0.25  0.55  1.50  6.00
                                                           R2                       GH   MP7035  45  90                     0.25  0.60  1.50  6.00
                                                           L1                       LM    US735  55  85                     0.10  0.30  0.30  2.00
                                                           L2                       SH   MP7035  55  105                    0.10  0.40  0.30  2.00
                                                           M1                       MM   MP7035  50  80                     0.15  0.45  0.70  5.00
                                                           M2                       GM   MP7035  50  80                     0.16  0.50  0.50  4.00
                                                           M3                       MA    US735  50  80                     0.20  0.50  0.30  4.00
                                                           M4                       MS   VP15TF  50  95                     0.16  0.50  0.50  4.00
                                                           M5                       MS   UP20M   45  75                     0.16  0.50  0.50  4.00
                                                           M6                       MS   UTi20T  55  80                     0.16  0.50  0.50  4.00
                                                           M7                       MS   VP15TF  45  60                     0.16  0.50  0.50  4.00
                                                           M8                       MA   VP15TF  45  75                     0.20  0.50  0.30  4.00
                                                           M9                       Std  MP7035  45  75                     0.25  0.60  1.50  5.00
                                                           R1                       RM    US735  45  75                     0.25  0.55  1.50  6.00
                                                           R2                       GH           45  90                     0.25  0.60  1.50  6.00

                 CUTTING CONDITIONS : : Stable Cutting : General Cutting : Unstable Cutting
                 CUTTING AREA : F : Finish Cutting L : Light Cutting M : Medium Cutting R : Rough Cutting H : Heavy Cutting

A076                                                       info@mitsubishitools.ru       www.mitsubishitools.ru