2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
FEATURES
y STABLE, LONG TOOL LIFE, HIGH ACCURACY BODY
A carbide shim with Mitsubishi's proprietary The cutter body is made from a special The ASX cutter uses screw-on type inserts
Anti-Fly Insert (AFI) mechanism provides alloy that provides high strength at high that allow easy clamping of the inserts with
excellent insert location characteristics, temperature. A special surface treatment high location precision. Indexing of the
permitting stable cutting even under high improves the corrosion resistance. inserts can be performed without
load conditions.
completely removing
the screw.
y EFFECTIVE FOR VARIOUS MACHINING APPLICATIONS
a Coarse Pitch Type a Fine Pitch Type a Extra Fine Pitch Type
1. 1st recommendation
1. 1st recommendation 1. 1st recommendation for cast iron.
for cutting steels and for cast iron, hardened 2. For cutting operations
stainless steels. steel and heat-resistant where chip dischange
alloys. volume is small and
2. For deep cutting and high high table feed is
feed rates with large- 2. For shallow cutting with desired.
volume chip discharge. low feed rates and low-
volume chip discharge. FT Rough cutting
3. Smooth cutting allows for cast iron
longer overhang Breaker
applications.
y CHIPBREAKERS FOR A WIDE RANGE OF APPLICATIONS
JL Finish to JM JHLight to Medium to JP Aluminium alloy
Light cutting Semi-Heavy cutting Heavy cutting cutting
Breaker Breaker
Breaker Breaker
High accuracy insert with High accuracy M class insert. High accuracy M class insert. High accuracy insert with ground finished High M class inserts. Higher ROTATING TOOLS
ground finished periphery. For a wide range of Strong cutting edge for high
Large rake angle leading workpiece materials and fracture resistance. periphery. Large rake angle and mirror fracture-resistant flat-top
to low cutting resistance. cutting conditions.
finished rake face for sharp cutting inserts.
performance and high welding resistance.
zWorkpiece rigidity is zGeneral cutting. zInterrupted cutting. zGeneral machining of aluminium zFor rough accuracy
low. xScaling. and non ferrous metal. machining of scaled cast iron.
y INSERT GRADES FOR A WIDE RANGE OF MATERIALS
P Carbon Steel · Alloy Steel M Stainless Steel K Cast Iron · Ductile Cast Iron N Aluminium Alloy S Heat Resistant Alloy H Heat Treated Steel
Titanium Alloy
High F7030 F7030 MP9120
VP15TF
MP6120 MC5020 HTi10
VP15TF
Cutting MP7130 MP9130 VP15TF
Speed MP6130 VP15TF MP7140
VP30RT VP15TF
Low VP30RT
Stable Cutting Unstable Stable Cutting Unstable Stable Cutting Unstable Stable Cutting Unstable Stable Cutting Unstable Stable Cutting Unstable
Conditions Conditions Conditions Conditions Conditions Conditions
(Note) When machining steel or stainless steel where the emphasis is on surface finish, use cermet grade NX4545.
Stable Cutting : Continuous cutting, Constant depth of cut, Pre-machined securely clamped component cutting
Unstable Cutting : Heavy interrupted, Irregular depth of cut, Low clamping rigidity cutting
info@mitsubishitools.ru www.mitsubishitools.ru K015TECHNICAL DATA N001