Для заказа - info@mitsubishitools.ru
APPLICATIONS V Groove Round Hole Screw A Side Lock Holder
Notch of Drill Shank Screw B
yAPPLICATION OF THE JUST FIT SLEEVE
1 When inserting the drill into the side lock holder,
align the V groove on the outer peripheral edge of
the drill flange, the round holes of the outer
peripheral edge of the sleeve flange and the screws
of the side lock holder for fixing the drill. (If the drill
does not have a V groove, align the notch of the
drill shank with the round holes of the sleeve.)
2 Insert screws A of the side lock holder directly
through the open window of the sleeve to clamp the
drill. Tighten screw B only to a degree that does not
damage the sleeve.
(Note)
• Fine adjustments cannot be made for the diameter
of the sleeve.
• Cannot be used with collect chuck type holders.
DRILLING TAF DRILLS
APPLICATIONS
info@mitsubishitools.ru D177
www.mitsubishitools.ru
