2014-2015 Полный каталог инструмента Mitsubishi (Митсубиси) EN
для заказа - info@mitsubishitools.ru
ROTATING TOOLS
INSERTS
Coated Dimensions (mm)
Shape Order Number MP8010 D1 Re F1 ap L1 S1 Geometry
VP15TF
SUFT10R05 Re±0.010
10R10 aa 10 0.5 1 1.5 8.5 2.6 F1
10R20 aa 10 1 1 2 8.5 2.6 ap
12R05 aa 10 2 1 3 8.5 2.6 L1±0.015
12R10 aa 12 0.5 1.2 1.7 10 3
12R20 aa 12 1 1.2 2.2 10 3 S1
12R30 aa 12 2 1.2 3.2 10 3
16R05 aa 12 3 1.2 4.2 10 3 D1-0.002
16R10 aa 16 0.5 1.6 2.1 12 4
ROTATING TOOLS 16R15 aa 16 1 1.6 2.6 12 4
16R20 aa 16 1.5 1.6 3.1 12 4
16R30 aa 16 2 1.6 3.6 12 4
20R05 aa 16 3 1.6 4.6 12 4
20R10 aa 20 0.5 2 2.5 15 5
20R15 aa 20 1 2 3 15 5
20R20 aa 20 1.5 2 3.5 15 5
20R30 aa 20 2 2 4 15 5
25R05 aa 20 3 2 5 15 5
25R10 aa 25 0.5 2.5 3 18.5 6
25R20 aa 25 1 2.5 3.5 18.5 6
25R30 aa 25 2 2.5 4.5 18.5 6
30R05 aa 25 3 2.5 5.5 18.5 6
30R10 aa 30 0.5 3 3.5 22.5 7
30R20 aa 30 1 3 4 22.5 7
30R30 aa 30 2 3 5 22.5 7
32R05 aa 30 3 3 6 22.5 7
32R10 aa 32 0.5 3.2 3.7 23.5 7
32R20 aa 32 1 3.2 4.2 23.5 7
aa 32 2 3.2 5.2 23.5 7
INSERT INSTALLATION Concave Mark
1. Clean the insert and seat
Thoroughly clean the insert and seat in the holder body.
2. Fitting the insert
Place the concave mark on the insert uppermost as shown with the clamp screw
inserted from above (only SUF type inserts). Fasten the clamp screw while firmly
pressing the insert against the insert seat wall. Use of a special anti seize lubricant
MK1KS is recommended. Tighten within the recommended torque range.
K098 a : Inventory maintained. (2 inserts in one case) www.mitsubishitools.ru
info@mitsubishitools.ru